Tomei Arms Round 2!!!!!
#1
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Aug 2007
Location: FL
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Tomei Arms Round 2!!!!!
So we finally fixed Luis's(aka.ralliart15) problem with the head and went for some tuning this morning.....there were a couple changes from last time, he switched from a ported BR manifold to a stock one. The final numbers were 420whp 369tq and the powerband is pretty impressive. Here are the mods....dyno sheet below.
Tomei Arms 7960
Stock Block
Unported Head
Head studs
Kelford 272's w/ springs etc
Stock IM
Ported TB
Injen piping
ASAPPerformance 4.5" Intercooler
02 dump
Hallman manual boost controller
Coated GT-spec exhaust manifold
Pump gas
25psi spike
Stock ECU tuned by Cwill
Tomei Arms 7960
Stock Block
Unported Head
Head studs
Kelford 272's w/ springs etc
Stock IM
Ported TB
Injen piping
ASAPPerformance 4.5" Intercooler
02 dump
Hallman manual boost controller
Coated GT-spec exhaust manifold
Pump gas
25psi spike
Stock ECU tuned by Cwill
Last edited by CWiLL; Aug 18, 2009 at 09:40 PM.
#3
Evolved Member
iTrader: (20)
Join Date: Jul 2007
Location: Gator Nation(UF)
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
This is my car and it was a dynojet....I switched because I didn't have enough money to fix the head so I needed some quick cash and I knew this manifold would sell quickly.
btw last time I dyno'ed on the stock turbo it made 355whp @ 25psi, so thats a 65whp increase...
btw last time I dyno'ed on the stock turbo it made 355whp @ 25psi, so thats a 65whp increase...
Last edited by aka.ralliart15; Aug 18, 2009 at 06:22 PM.
#5
Evolved Member
iTrader: (20)
Join Date: Jul 2007
Location: Gator Nation(UF)
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Im going back to Gainesville / UF on thursday morning though so thats the issue, maybe i'll hit the Gainesville Raceway track, I heard its nice.